About Voyager Sportswear
We manufacture custom sportswear and teamwear in series for clubs, brands, agencies, wholesalers and event organisers. Our team of 70 people develops, cuts, prints, sews and checks every order in our own factory in Turkey.
Sportswear made to order, in series
We make sportswear to each buyer's own design and specification: full-print jerseys and T-shirts, training tops, jackets, hoodies, shorts, leggings and tracksuits, finished under the buyer's label.
Our buyers are clubs and teams, sportswear brands, agencies, merchandising companies, wholesalers, distributors, retailers and the organisers of races and tournaments, mainly in Europe, the United Kingdom and North America. Start from a tech pack, a sketch or a reference garment; design development is available on request.
Voyager Sportswear is the sportswear manufacturing division of Voyager Textile.
- people in our team
- 70
- minimum per styleMinimum quantities may vary by product and customisation.
- 100pcs
- usual time to a first reply
- 24 h
- monthly production capacity
- 100Kpcs
- business days, typical sampling timeSampling time depends on the product and the customisation.
- 5–7
Part of Voyager Textile
Voyager Sportswear is the sportswear manufacturing division of Voyager Textile, a VGR Group company. One group: a specialist sportswear team, backed by the wider company.
Group
VGR Group
Parent company
Voyager Textile
Sportswear manufacturing division
Voyager Sportswear
Integrated sportswear manufacturing
From the first pattern to the packed carton, each stage runs in our own operation, so fit, construction and artwork are assessed together for every order.
- 01
Product development and pattern making
Your design, sketch or reference garment becomes a production pattern and a measurement chart.
- 02
Sampling
A sample shows fit, construction and branding before bulk production. You approve it or send one list of corrections.
- 03
Cutting
The fabric is laid and cut to the approved pattern, panel by panel.
- 04
Printing and branding
Sublimation for full-print designs; DTF printing, heat transfer and embroidery for logos, crests and numbers.
- 05
Sewing
Our sewing team assembles the panels into finished garments.
- 06
Finishing and packing
Garments are pressed, folded, bagged and packed in cartons as agreed for the order.
- 07
Quality control
Our own team checks the garments during production and again before packing.
Fabric and trims are chosen for each order to suit the garment, its use and the branding method.
How production runsA look inside the production
This film was recorded at the Voyager Textile facility. It follows garments through digital textile printing, cutting, sewing, pressing and packing.
They are the stages our team runs for sportswear orders, from the first printed panel to the sealed carton.
In the film
- Digital textile printing
- Cutting
- Sewing
- Pressing and folding
- Packing in cartons
From first brief to packed order
Four steps take a project from enquiry to production. Each one links to the page that covers it in detail.
How production runs- 01
Define the product
You send a design, sketch or reference with the intended use, approximate quantities and target date, and mark the features to keep and the areas where you want advice. We then list the open questions on fabric, fit, artwork and construction.
OEM & ODM - 02
Develop and review a sample
Before sampling, we agree the garment measurements, fabric direction and branding with you. You then check the finished sample for fit, movement, fabric feel, construction and graphic placement and collect any corrections in one clear revision list.
Development and sampling - 03
Confirm the order details
You identify the approved sample and artwork, then confirm quantities by style, colour and size. If numbers are required, the number list is checked separately. Label content and packing groups belong in the same order, so production works from one consistent set of information.
Request a quote - 04
Make the garments and prepare packing
Production follows the agreed garment specification, with cutting, printing or embroidery and sewing in the order the chosen method requires. We check the result against the sample and the order data, then pack the garments in the groups and with the identification agreed for the order.
Packing and dispatch preparation
Checked by our own team
Quality control at Voyager Sportswear is carried out in house by our own team. The reference is always the approved sample and the agreed order details.
- During production
- Checks follow the garments through cutting, printing and sewing, comparing construction and artwork placement with the approved sample.
- Before packing
- A final check reviews the finished garments for fit, construction and artwork against the sample and the order details before they are folded and packed.
Documentation for supplier assessment
Send your purchasing team's document checklist with your enquiry, naming any standard you work to and whether it applies to the fabric, the finished garment or the manufacturing site. We confirm which documentation is available for the project.
Send the checklist tohello@vgrsportswear.com
Factory and showroom
- Factory
- Black Sea region, Turkey
- Where garments are developed, made, checked and packed.
- Showroom
- Istanbul, Turkey
- Where we receive buyers.
Questions and answers
Does Voyager Sportswear make the garments in its own factory?
Yes. Voyager Sportswear is a direct sportswear manufacturer. Our team of 70 people handles product development and pattern making, sampling, cutting, printing and branding, sewing, finishing and quality control in our own factory in Turkey. We make sportswear in series, to the buyer's design and under the buyer's label.
How is Voyager Sportswear related to Voyager Textile?
Voyager Sportswear is the sportswear manufacturing division of Voyager Textile, a VGR Group company. The division concentrates on sportswear and teamwear made in series and works within the wider Voyager Textile organisation.
Does Voyager Sportswear work as an OEM or ODM manufacturer?
Both. Voyager Sportswear manufactures to a buyer's own specification (OEM) and also offers design support on request (ODM). For an OEM project, send the construction, measurements, fabric requirements and artwork. For design support, send the intended use, references, preferred fit and branding, and we agree with you what to develop. You do not need to choose a model first. OEM and ODM starting points
Which markets does Voyager Sportswear manufacture for?
Voyager Sportswear manufactures for business buyers in Europe, the United Kingdom and North America: clubs, teams, sportswear brands, agencies, merchandising companies, wholesalers, distributors, retailers and sourcing companies. Tell us the destination with your enquiry, together with any labelling or packing requirements for that market, so we can assess them along with the garment.
How quickly does Voyager Sportswear reply to a new enquiry?
Voyager Sportswear usually sends an initial reply within 24 hours. This first response is not yet a quotation. It may ask the questions we need answered to assess the product, for example about fabric, quantities or artwork, and the quotation follows once those points are clear. Send an enquiry
Bring us your product idea
Send the garment, your design or reference, an approximate quantity and the date you need it. A complete tech pack helps, but it is not needed for the first conversation.